Rated Capacity: Unless otherwise noted, all rated capacity information refers to the product’s breaking strength, or force required to cause significant permanent distortion of a component (whichever is less), in a straight tensile test. The weakest link of any assembly determines the product’s breaking strength. For this reason, it is important that attachment points be of equal or greater strength than the product in use to maintain the rated capacity of the product.

Safe Working Load: The safe working load limit of a component or tie-down assembly is 1/3 of the product’s rated capacity (breaking strength). Do not exceed the safe working load limit of any product.

Cautions / Warnings: It is the responsibility of the user to determine strength requirements for their specific applications, as well as the safe working load limit of the tie-down component or tie-down assembly they are using. Stated rated capacities are for products in new condition. Age, wear and damage to webbing or components shall result in a loss of rated capacity (breaking strength). Never attempt to use a worn or damaged tie-down assembly. Inspect each product before each use and immediately replace any worn or damaged products. For effective operation, and to avoid serious injury, read and comply with all instructions and cautions found on IMMI packaging and products.